12
Restore All Locked-out Channels
1. Press .
2. Press and hold
/L/O for about
two seconds.
You will hear two beeps when all the
channels have been restored.
Priority Scan
When priority scan is turned on, your
scanner checks the priority channel
every two seconds for activity. If a
signal is present on the priority
channel, your scanner monitors the
channel until the transmission ends,
then resumes normal scanning. You
can designate any of the 100 available
channels as your priority channel.
Changing the Priority Channel
You cannot eliminate the priority
channel, but you can change it to any
other of the 100 available channels.
To activate priority scan (in either
manual or scan mode):
1. Press
PRI
.
2. Press
PRI
again at anytime to
deactivate priority scan.
1. Press /PROG.
STEP
2. Select a new priority channel.
a) Enter the channel number.
b) Then press
PRI
again.
