1
GENERAL
1.1
How to use this manual
This manual is intended as a reference book by means of which qualified users are able to in-
stall, commission, operate and maintain the pulsation dampener mentioned on the front cover.
1.2
Service and support
For information with respect to specific adjustments, installation, maintenance or repair that
fall beyond the scope of this manual, contact your Albin Pump SAS representative. They will
be happy to help. Make sure you have the following information at hand:
•
serial number pulsation dampener
•
type number pulsation dampener
You will find this data on the identification plate of the pulsation dampener
1.3
Disposal of waste and the environment
Enquire within your local government about the possibilities for reuse or environment friendly
processing of packaging materials, (contaminated) lubricant and oil.
Always observe the local rules and regulations with respect to processing (non-reus-
able) parts of the pulsation dampener.
1.4
Specifications
Pulsation absorption can be as much as 85%.
Best result when the pick of maximum pulsation is +- 6 bar
Minimum pulsation dampening pressure: 2 bar
Maximum dampening pressure on air: 10 bar
Maximum temperature: 70°C
2
SAFETY
2.1 Symbols
In this manual the following symbols are used:
WARNING
Procedures, which, if not carried out with the necessary care, may result in serious dam
age to the pulsation dampener or in serious bodily harm.
CAUTION
Procedures not carried out with the necessary care, may result in serious damage to the
pulsation dampener, the surrounding area or the environment.
Remarks, suggestions and advice.
Procedures, remarks, suggestions or advice which refers to use in potentially explosive
atmospheres (ATEX) in accordance with European guideline 94/9/EC.
