Alber viamobil eco, User Manual

Page: 16 / 37

8 3
2.9 Removing viamobil from the Wheelchair
Once attached to the wheelchair, your viamobil generally remains assembled.
If the device has nevertheless to be removed from the wheelchair at all, especially for
transport purposes, then this can be done quickly and easily. The wheelchair occupant
should sit in the wheelchair in order to facilitate the removal of viamobil. The lever
brakes on the wheelchair also have to be pulled in order to prevent it from unintenti-
onally rolling away.
If you haven‘t done so:
check that the drive wheels of your viamobil are extended (see chapter 2) and roll
operation has been activated (see chapter 2.2).
Pull the lock [24] upwards on the bracket [21] on both sides until it cannot go
any further.
Move the pedal [2] from its resting position into the middle position (see figure).
Press the pedal [2] down strongly with the forward section of your foot when it
is in the middle position and at the same time remove the viamobil from the bra-
ckets.
i
If Alber anti-tippers are attached to your wheelchair (see chapter 8, anti-
tippers) then they have to be removed to be able to remove the viamobil
from the wheelchair. The anti-tippers have to be reattached (see chapter
8) as soon as the viamobil has been removed from the wheelchair.
•
•
•
•
21
24
21
24
22
GA-V14-USA.indd 13 18.09.2006 11:51:30