8
33
Display
Error
Remedy
M16 to
M19
Drive overload error
•
The load is too high for the drive. Prevent overloading.
M20 to
M51
Check electronics, drive failure
•
Switch the system off and then on again.
•
Swap the two wheels from the left to the right and from
the right to the left-hand side.
M52
Right drive disengaged
•
Engage the right wheel.
M53
Left drive disengaged
•
Engage the left wheel.
M54
Left and right drive disengaged
•
Engage both wheels.
M55,
M56
High drive temperature
•
Reduce your speed.
•
Let the drive cool down.
S10,
S11
Unable to communicate with the wheel
•
Switch the system off and then on again.
•
Swap the two wheels from the left to the right and from
the right to the left-hand side.
•
If the error changes from S10 to S11: Swap the wheels
again.
S12
Unable to communicate with the battery pack
•
Switch the system off, take the control unit plug out
of the battery pack and take the battery pack out of the
interface.
•
Then insert the battery pack back into the interface and
connect the control unit.
S13
No system communication
•
Check all plug connections.
S15
Communication was interrupted during travel
•
Check all plug connections.
•
Switch the system off and then on again.
S17
External communication error
•
Contact your specialist dealer
If an error code appears in the display that is not listed in the table, switch the Esprit off and on again. If an
error is not resolved by doing this, please contact your specialist dealer. Depending on the type of error, the
affected components may need to be sent to Alber for repair.
i
