22
3.3.3 Voltage or Resistive Inputs
Inputs 20,21,22,24,25,26 can be configured in voltage or resistive mode according to your needs.
Inputs 29,30,31,33,34,35 can be only configured in voltage.
To change between voltage o resistive mode, you have to open the AlbaCombi case, then you
will see six switches. Check the yellow squares in the following image.
The Downwards position is for Voltage measurement, the upwards position Resistive
measurement.
IMPORTANT:
To get it to work now we must press the Reset Button shown in a red circle.
Just refresh the AlbaCombi Web-Interface and we are done. You can perform this operation just
for one switch or the number you wish.
