PX865PEL-800
31
Onboard Device
If you highlight the “INTEL OnChip PCI Device” label and then press the enter key, it will take you
a submenu with the following options:
USB Controller
his option should be enabled if your system has a USB port installed on the system board.
T
n
You will
controller.
ure if you install a USB 1.1 device.
Enables support
a
AC97 Audio
This item allows you to control
Onboard LAN Con
This item
Options: Enabled (default)
、
WRON After PWR-Fail
ystem will boot after restoring power after a power failure. If
lect a way to power on your computer. Options: Password
、
Hot KEY
、
board 98
that your system will use as part of the power-on sequence. This field is only
et to “Password”.
eed to disable this feature if you add a higher performance
Options: Enabled (default)
、
Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feat
Options: Enabled (default)
、
Disabled
USB Keyboard Support
for USB att ched keyboards. Options: Disabled (default)
、
Enabled
the onboard AC’97 audio. Options: Auto (default)
、
Disabled
trol
allows you to enable or disable onboard LAN Controller.
Disabled
Onboard I/O Chip Setup
P
This field will determine whether your s
you select “On”, the system will boot whether or not the system was on before power failure. If you
select “Former-Sts”, the system will be restored to the status before the power failure.
Options: Off (default)
、
On
、
Former-Sts
Power On Function
This option allows you to se
Mouse Left
、
Mouse Right
、
Any KEY
、
BUTTON ONLY (default), and Key
KB Power On Password
Supply a password
configurable when “Power On Function” is s