PX865PEL-800
24
OS Select For DRAM > 64MB
Enabled
dvanced Chipset Features
using SPD or manual configuration.
mod
a), if you want to select the “By SPD”
By
is field from the default value
field is adjustable only when “DRAM Timing Selectable” is
t to “Manual”. Options: 2
、
2.5
、
3 and By SPD (default)
rge Delay.
ptions: 8
、
7
、
6
、
5 and default is by SPD
his item allows you to select a delay time between the CAS and RAS strobe signals. It only applies
or refreshed. This field is adjustable only when “DRAM
is set to “manual”. Options: 4
、
3
、
2 and default is by SPD
his item allows you to select the DRAM RAS# precharge time. The ROW address strobe must
n inadequate configuration may result in incomplete
Select “OS2” only if you are running the OS/2 operating system with greater than 64MB of RAM.
Options: Non-OS2 (default)
、
OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)
、
Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA. Options: Disabled (default)
、
A
DRAM Timing Selectable
This item determines DRAM clock/ timing
Make sure your memory
ule has SPD (Serial Presence Dat
option. Options: Manual
、
SPD (default)
CAS Latency Time
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock
cycles of CAS latency depends on the DRAM timing. Do not reset th
specified by the system designer. This
se
Active to Precharge Delay
This item allows you to select DRAM Active to Precha
O
DRAM RAS# to CAS# Delay
T
when DRAM is written to, read from,
Timing Selectable”
DRAM RAS# Precharge
T
precharge again before DRAM is refreshed. A
data. This field is adjustable only when “DRAM Timing Selectable” is set to “manual”.
Options: 4
、
3
、
2 and By SPD (default)