PM800 Series
PCI PME Wake Up
When you select “Enabled”, a PME signal from any PCI card will awaken the system from suspend mode.
Options: Disabled (default)
、
Enabled.
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call a modem device. Options:
Disabled (default)
、
Enabled
RTC Wake Up
When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode. Options: Enabled
、
Disabled (default)
Date (of Month)
You can choose which month the system will boot up. This field is only configurable when “RTC Wake
Up” is set to “Enabled”
Resume Time (hh: mm: ss)
You can choose the hour, minute and second the system will boot up. This field is only configurable
when “RTC Wake Up” is set to “Enabled”
IRQs Activity Monitoring
Press Enter to access a sub menu used to configure the different wake up events (i.e. wake on LPT &
COMM activity).
Primary INTR
On IRQ9 (IRQ2 Redir)
Disabled
IRQ3 (COM2)
Disabled IRQ10 (Reserved)
Disabled
IRQ4 (COM1)
Enabled IRQ11 (Reserved)
Disabled
IRQ5 (LPT2)
Enabled IRQ12 (PS/2 Mouse)
Enabled
IRQ6 (Floppy Disk)
Enabled IRQ13 (Coprocessor)
Enabled
IRQ7 (LPT1)
Enabled IRQ14 (Hard Disk)
Enabled
IRQ8 (RTC Alarm)
Disabled IRQ15 (Reserved)
Disabled
40
