RCA L
Version 2.0
22
5.8 Closing the side frames
Open the side frame covers as shown in figure 16.
Bring the curtain down so it travels behind the idler
barrel and down into the guides of the side frame.
(If you need to get the bottom beam behind the
idler barrel you can remove the bottom bolt on
each side of the idler barrel, and swing it down out
of the way.)
Next figure 17 shows the guides closed and set to
the proper clearance gap. This gap is a minimum
of ½” (13 mm). This gap allows the curtain to travel
within the guide freely.
Installation
Figure 16
½”
Summary of Contents for RCA L
