Albalá Ingenieros AVP0622C01, User Manual

Page: 21 / 28

Albalá Ingenieros | Manual AVP0622C01
The following functions of the AVP0622C01 can be performed remotely:
- Selection of the operating mode.
- Selection of the input to be connected to the output.
4.3.1. Details of the AVP0622C01 registers
The AVP0622C01 module provides control and status registers that can be read and
written by means of specific commands described in the communication control
module user manuals.
The parameter information grouped in the CONTROL or RAM sections is stored in
volatile memory. Any modifications to the parameters will be lost when the module
power supply is disconnected unless the "EEPROM Save" button within the software
has been pressed.
The STATUS section parameters are read-only and cannot be modified.
The parameters that can be controlled and supervised remotely for each version of
the firmware are listed below:
VERSION 1.X
CONTROL
Name add ext msk snmp trap Description
OUTPUT1 0x00 0x0F Y N Input routed to output 1
= Input x (0=None)
OUTPUT2 0x00 0xF0 Y N Input routed to output 2
= Input x (0=None)
SWITCH_MODE 0x01 0x0F Y N Allows selection switching mode: master or follow another module
= Slave of x
SWITCH_TIME 0x01 0xC0 Y N Allows selection of switching time
0=Fast, 1=Field, 2=Frame, 3=Slave
NO_SYNC_MASK 0x02 0x01 N N Allows masking of no sync
0=Disabled, 1=Enabled
STATUS
Name add ext msk snmp trap Description
NO_SYNC 0x00 0x01 Y N Sync presence status
0=OK,1=Fail
SYNC_LINES 0x01 0x01 Y N Number of lines of sync signal
0=625, 1=525
SYNC_TYPE 0x01 0x02 Y N Type of sync signal
0=Field, 1=Frame
21