Albalá Ingenieros AVD0001C01, Manual

Page: 11 / 24

Albalá Ingenieros | Manual AVD0001C01
3. INSTALLATION
THE AVD0001C01 MODULE CONTAINS ELECTRONIC DEVICES SENSITIVE TO
ELECTROSTATIC DISCHARGE. Always use antistatic bags clearly identified
with a high degree of shielding for storage and transportation.
3.1. Initial inspection
The AVD0001C01 is a desktop unit and does not require installation in a rack or similar
housing. However, it has threaded fasteners for M4 screws at its base for attachment to
a panel or other surfaces if necessary.
Verify that the package has been properly handled during transport. After opening the
package, check that the AVD0001C01 and wall power supply are inside.
You must notify your Albalá Ingenieros distributor or dealer of any damage or defects
observed.
3.2. Safety instructions
• The AVD0001C01 contains devices that are not commercially available,
therefore in case of failure Albalá Ingenieros'technical service is
recommended.
• The AVD0001C01 is a telecommunications infrastructure device and must
be installed and operated by technicians with appropriate training.
• The AVD0001C01 is powered by DC voltage. This voltage must be obtained
from the external power supply included with the equipment, or from
another supply that converts the mains voltage into a Safety Extra Low
Voltage (SELV) as per EN 60950-1.
• The equipment should never be powered by overhead power lines that may
be affected by electric or atmospheric discharges. Any power supply used
must be marked with the double insulation or reinforced insulation symbol.
11