background image

51

50

IV. If the problem persists, contact ALBA customer service. 

f. The vehicle is travelling at low speed: 

I. Check that the battery charge status indicator has at least 

one green LED lit. With a reduced state of charge, the car 
proceeds at low speed and limited power in order not to damage 
the batteries. 

II. If the problem persists, contact ALBA customer service. 

g. In case of electrical fault: 

I. Switch the key contact off and then on again after about 15 

seconds to reset the errors in the controller. 

II. If the problem persists, contact ALBA customer service. 

h. The lights do not work: 

I. Check that the fuses are not blown 
II. Check the DC-DC charger for faults or anomalies
III. Check for 12V on the USB. If absent, the problem is related 

to DC-DC and needs to be replaced. 

IV. If the problem persists, contact ALBA customer service. 

10.1 DECOMMISSIONING AND DISMANTLING

At the time of dismantling, it is necessary to separate the plastic 
parts, metal parts and electrical components, which must 
be sent for separate collection, in accordance with current 
legislation. 

As far as the metal mass of the vehicle is concerned, it is 
sufficient  to  separate  the  ferrous  parts  from  the  parts  made 
of other metals or alloys in order to send them for recycling by 
melting.

10. ADDITIONAL

INSTRUCTIONS

Summary of Contents for Crew
































Reviews: