Alba Crew, Manual

Page: 18 / 31

33 32
USB charging socket.
The USB charging socket on the
passenger side is activated by pressing the integrated button.
Two devices can be charged simultaneously, for example.
The charging capacity is 2.1 amps per channel. The socket is
functional even if the vehicle is in "OFF" mode.
WARNING! To preserve battery
power in this condition, it is
recommended to switch off the
USB socket as soon as possible.
The vehicle remains switched off with the electromagnetic brake
locked: the only utility powered by the batteries is the driver's side
USB charging socket, which can be activated with the button.
ON.
The vehicle is switched on and, by pressing the 'D' (forward)
or 'R' (reverse) buttons and depressing the accelerator pedal, it
is set in motion. The battery charge indicator is also illuminated.
.
The key in this position turns on the vehicle's front and rear
lights; this position maintains the ON state.
Forward control ("D").
Following actuation of the button identified
with the letter "D", by acting on the accelerator
pedal, the vehicle moves forward.
Reverse control ("R").
When the button labelled "R" is pressed under
the accelerator pedal, the vehicle reverses.
When reversing, an intermittent acoustic warning sounds. If the
"R" button is held down for 5 seconds, the vehicle switches to
"Neutral" mode.
WARNING! The user must pay particular attention when
driving in reverse. The acoustic warning does not
exempt the driver from driving carefully and
responsibly.
Brake pedal.
There is a redundancy in the
brake pedal. In an emergency, depressing the
brake pedal will disable traction.
Accelerator pedal.
When activated,
the vehicle moves in the direction set with the
steering wheel controls. If released, the vehicle
stops within the time set by the controller.
Three seconds after stopping, the electromagnetic brake is
activated. If released while climbing, under the same conditions,
the "HILL HOLDER" function is activated.