Alba 411012, Instruction Manual

Page: 34 / 44

Other information
Helpful technical information
Other information
34
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Software version
You can check the software version of your radio.
With your radio switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options
2. Press and release the Prev or Next buttons to scroll to <System>. Press and release the
Select button.
3. Press and release the Prev or Next buttons to scroll to <SW Version>. Press and release
the Select button.
The software version will be displayed and you may wish to make a note of it here:
...................................................................................
Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your stored station presets will be deleted.
With your radio switched on (not in Standby mode):
1. Press and hold the Menu/Info button to enter the menu options
2. Press and release the Prev or Next buttons to scroll to <System>. Press and release the
Select button.
3. Press and release the Prev or Next buttons to scroll to <Factory reset>. Press and
release the Select button. Factory Reset? <No> Yes will be displayed.
4. Press and release the Prev button to scroll to <Yes>. Press and release the Select
button.