Safety-7
When moving the Device, do not hold the handle of an optional module.
When moving the Device, do not hold the handle of the fan unit or power input unit, or the lever of the
power supply unit. The handle or lever might come off, resulting in the Device falling and possibly
causing injury. Additionally, the fan unit, power input unit, or power supply unit might become
damaged, resulting in a fire or electric shock.
When moving the Device, unplug all cables.
Before moving the Device, make sure that you turn it off and unplug all cables. Failure to do so might
cause the Device or cable to become damaged, resulting in a fire or electric shock.
Do not drop optional modules.
Handle the optional modules with care to avoid dropping them. Dropping them might cause injury.
The table below lists the weight of each optional module. When removing an optional module from
the Device, hold the module tightly. Pulling it carelessly from a Device might cause it to fall,
resulting in injury.
Weight of optional modules
Type
Weight
Power supply unit
6.1 kg
Basic control unit
3.0 kg
Packet routing unit
(when a network interface board is mounted)
9.2 kg
Fan unit
1.7 kg
Do not touch the inside of the Device with your hands.
Do not carelessly put your hands inside the Device. The frame and components might cause injury.
Be careful of heat when removing a power supply unit.
The rear side of the power supply unit might be hot. Do not touch areas that are heated when you
replace the power supply unit. Doing so might result in burns.
Be careful of heat when removing a network interface board.
Some components mounted on a network interface board might be hot. Do not touch the mounted
components. Doing so might result in burns.
CAUTION
Safety Information (continued)
