Alarm Lock Trilogy DL3500 Programming Instructions Manual Download Page 36

36 

 

ALARM LOCK SYSTEMS, INC. (ALARM LOCK) warrants 
its products to be free from manufacturing defects in mate-
rials and workmanship for twenty four months following the 
date of manufacture. ALARM LOCK will, within said peri-
od, at its option, repair or replace any product failing to 
operate correctly without charge to the original purchaser 
or user. 

This warranty shall not apply to any equipment, or any part 
thereof, which has been repaired by others, improperly 
installed, improperly used, abused, altered, damaged, sub-
jected to acts of God, or on which any serial numbers have 
been altered, defaced or removed. Seller will not be re-
sponsible for any dismantling or reinstallation charges, 
environmental wear and tear, normal maintenance ex-
penses, or shipping and freight expenses required to re-
turn products to ALARM LOCK.  Additionally, this warranty 
shall not cover scratches, abrasions or deterioration due to 
the use of paints, solvents or other chemicals. 

THERE ARE NO WARRANTIES, EXPRESS OR IM-
PLIED, WHICH EXTEND BEYOND THE DESCRIPTION 
ON THE FACE HEREOF. THERE IS NO EXPRESS OR 
IMPLIED WARRANTY OF MERCHANTABILITY OR A 
WARRANTY OF FITNESS FOR A PARTICULAR PUR-
POSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU 
OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE 
PART OF ALARM LOCK. 

Any action for breach of warranty, including but not limited 
to any implied warranty of merchantability, must be 
brought within the six months following the end of the war-
ranty period.  

IN NO CASE SHALL ALARM LOCK BE LIABLE TO ANY-
ONE FOR ANY CONSEQUENTIAL OR INCIDENTAL 
DAMAGES FOR BREACH OF THIS OR ANY OTHER 
WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE 
LOSS OR DAMAGE IS CAUSED BY THE SELLER'S 
OWN NEGLIGENCE OR FAULT. 

In case of defect, contact the security professional who 
installed and maintains your security system. In order to 
exercise the warranty, the product must be returned by the 
security professional, shipping costs prepaid and insured 
to ALARM LOCK. After repair or replacement, ALARM 
LOCK assumes the cost of returning products under war-
ranty. ALARM LOCK shall have no obligation under this 
warranty, or otherwise, if the product has been repaired by 
others, improperly installed, improperly used, abused, al-
tered, damaged, subjected to accident, nuisance, flood, 
fire or acts of God, or on which any serial numbers have 
been altered, defaced or removed. ALARM LOCK will not 
be responsible for any dismantling, reassembly or reinstal-
lation charges, environmental wear and tear, normal 
maintenance expenses, or shipping and freight expenses 
required to return products to ALARM LOCK.  Additionally, 
this warranty shall not cover scratches, abrasions or dete-
rioration due to the use of paints, solvents or other chemi-
cals. 

This warranty contains the entire warranty. It is the sole 
warranty and any prior agreements or representations, 
whether oral or written, are either merged herein or are 
expressly cancelled. ALARM LOCK neither assumes, nor 
authorizes any other person purporting to act on its behalf 
to modify, to change, or to assume for it, any other warran-
ty or liability concerning its products. 

In no event shall ALARM LOCK be liable for an amount in 
excess of ALARM LOCK's original selling price of the 
product, for any loss or damage, whether direct, indirect, 
incidental, consequential, or otherwise arising out of any 
failure of the product. Seller's warranty, as hereinabove set 
forth, shall not be enlarged, diminished or affected by and 
no obligation or liability shall arise or grow out of Seller's 
rendering of technical advice or service in connection with 
Buyer's order of the goods furnished hereunder. 

ALARM LOCK RECOMMENDS THAT THE ENTIRE SYS-
TEM BE COMPLETELY TESTED WEEKLY. 

Warning: 

Despite frequent testing, and due to, but not 

limited to, any or all of the following; criminal tampering, 
electrical or communications disruption, it is possible for 
the system to fail to perform as expected. ALARM LOCK 
does not represent that the product/system may not be 
compromised or circumvented; or that the product or sys-
tem will prevent any personal injury or property loss by 
burglary, robbery, fire or otherwise; nor that the product or 
system will in all cases provide adequate warning or pro-
tection. A properly installed and maintained alarm may 
only reduce risk of burglary, robbery, fire or otherwise but 
it is not insurance or a guarantee that these events will not 
occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIA-
BILITY FOR ANY PERSONAL INJURY, PROPERTY 
DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE 
PRODUCT FAILED TO GIVE WARNING. Therefore, the 
installer should in turn advise the consumer to take any 
and all precautions for his or her safety including, but not 
limited to, fleeing the premises and calling police or fire 
department, in order to mitigate the possibilities of harm 
and/or damage.  

ALARM LOCK is not an insurer of either the property or 
safety of the user's family or employees, and limits its lia-
bility for any loss or damage including incidental or conse-
quential damages to ALARM LOCK's original selling price 
of the product regardless of the cause of such loss or 
damage. 

Some states do not allow limitations on how long an im-
plied warranty lasts or do not allow the exclusion or limita-
tion of incidental or consequential damages, or differenti-
ate in their treatment of limitations of liability for ordinary or 
gross negligence, so the above limitations or exclusions 
may not apply to you. This Warranty gives you specific 
legal rights and you may also have other rights which vary 
from state to state. 

ALARM LOCK LIMITED WARRANTY

 

Summary of Contents for Trilogy DL3500





































Reviews: