background image

36 

ALARM LOCK LIMITED WARRANTY

 

ALARM LOCK  SYSTEMS, INC. (ALARM LOCK) warrants its products to be free from manufacturing defects in 
materials and workmanship for 24 months following the date of manufacture. ALARM LOCK will, within said period, at 
its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user. 

This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, improperly 
installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which any serial numbers have 
been altered, defaced or removed. Seller will not be responsible for any dismantling or reinstallation charges. 

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON 
THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A 
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU OF 
ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF ALARM LOCK. 

Any action for breach of warranty, including but not limited to any implied warranty of merchantability, must be 
brought within the six months following the end of the warranty period. IN NO CASE SHALL ALARM LOCK BE 
LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY 
OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S 
OWN NEGLIGENCE OR FAULT. 

In case of defect, contact the security professional who installed and maintains your security system. In order to 
exercise the warranty, the product must be returned by the security professional, shipping costs prepaid and insured 
to ALARM LOCK. After repair or replacement, ALARM LOCK assumes the cost of returning products under warranty. 
ALARM LOCK shall have no obligation under this warranty, or otherwise, if the product has been repaired by others, 
improperly installed, improperly used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts 
of God, or on which any serial numbers have been altered, defaced or removed. ALARM LOCK will not be 
responsible for any dismantling, reassembly or reinstallation charges. 

This warranty contains the entire warranty. It is the sole warranty and any prior agreements or representations, 
whether oral or written, are either merged herein or are expressly canceled. ALARM LOCK neither assumes, nor 
authorizes any other person purporting to act on its behalf to modify, to change, or to assume for it, any other 
warranty or liability concerning its products. 

In no event shall ALARM LOCK be liable for an amount in excess of ALARM LOCK's original selling price of the 
product, for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of any 
failure of the product. Seller's warranty, as hereinabove set forth, shall not be enlarged, diminished or affected by and 
no obligation or liability shall arise or grow out of Seller's rendering of technical advice or service in connection with 
Buyer's order of the goods furnished hereunder. 

ALARM LOCK RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY. 

Warning: Despite frequent testing, and due to, but not limited to, any or all of the following; criminal tampering, 
electrical or communications disruption, it is possible for the system to fail to perform as expected. ALARM LOCK 
does not represent that the product/system may not be compromised or circumvented; or that the product or system 
will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; nor that the product or system 
will in all cases provide adequate warning or protection. A properly installed and maintained alarm may only reduce 
risk of burglary, robbery, fire or otherwise but it is not insurance or a guarantee that these events will not occur. 
CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, 
OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer 
should in turn advise the consumer to take any and all precautions for his or her safety including, but not limited to, 
fleeing the premises and allege police or fire department, in order to mitigate the possibilities of harm and/or damage. 

ALARM LOCK is not an insurer of either the property or safety of the user's family or employees, and limits its liability 
for any loss or damage including incidental or consequential damages to ALARM LOCK's original selling price of the 
product regardless of the cause of such loss or damage. 

Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation 
of incidental or consequential damages, or differentiate in their treatment of limitations of liability for ordinary or gross 
negligence, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights 
and you may also have other rights which vary from state to state.

 

Summary of Contents for Trilogy DL1300





































Reviews: