Alarm Lock Trilogy DL1200 Mounting And Installation Instructions Manual Download Page 8

ALARM LOCK SYSTEMS, INC. (ALARM LOCK) 

warrants its products to be free from manufacturing 
defects in materials and workmanship for 24 months 
following the date of manufacture. ALARM LOCK will, 
within said period, at its option, repair or replace any 
product failing to operate correctly without charge to 
the original purchaser or user. 

This warranty shall not apply to any equipment, or 

any part thereof, which has been repaired by others, 
improperly installed, improperly used, abused, altered, 
damaged, subjected to acts of God, or on which any 
serial numbers have been altered, defaced or 
removed. Seller will not be responsible for any 
dismantling or reinstallation charges. 

THERE ARE NO WARRANTIES, EXPRESS OR 

IMPLIED, WHICH EXTEND BEYOND THE 
DESCRIPTION ON THE FACE HEREOF. THERE IS 
NO EXPRESS OR IMPLIED WARRANTY OF 
MERCHANTABILITY OR A WARRANTY OF 
FITNESS FOR A PARTICULAR PURPOSE. 
ADDITIONALLY, THIS WARRANTY IS IN LIEU OF 
ALL OTHER OBLIGATIONS OR LIABILITIES ON 
THE PART OF ALARM LOCK. 

Any action for breach of warranty, including but not 

limited to any implied warranty of merchantability, must 
be brought within the six months following the end of 
the warranty period. IN NO CASE SHALL ALARM 
LOCK BE LIABLE TO ANYONE FOR ANY 
CONSEQUENTIAL OR INCIDENTAL DAMAGES 
FOR BREACH OF THIS OR ANY OTHER 
WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE 
LOSS OR DAMAGE IS CAUSED BY THE SELLER'S 
OWN NEGLIGENCE OR FAULT. 

In case of defect, contact the security professional 

who installed and maintains your security system. In 
order to exercise the warranty, the product must be 
returned by the security professional, shipping costs 
prepaid and insured to ALARM LOCK. After repair or 
replacement, ALARM LOCK assumes the cost of 
returning products under warranty. ALARM LOCK 
shall have no obligation under this warranty, or 
otherwise, if the product has been repaired by others, 
improperly installed, improperly used, abused, altered, 
damaged, subjected to accident, nuisance, flood, fire 
or acts of God, or on which any serial numbers have 
been altered, defaced or removed. ALARM LOCK will 
not be responsible for any dismantling, reassembly or 
reinstallation charges. 

This warranty contains the entire warranty. It is the 

sole warranty and any prior agreements or 
representations, whether oral or written, are either 
merged herein or are expressly cancelled. ALARM 
LOCK neither assumes, nor authorizes any other 

person purporting to act on its behalf to modify, to 
change, or to assume for it, any other warranty or 
liability concerning its products. 

In no event shall ALARM LOCK be liable for an 

amount in excess of ALARM LOCK's original selling 
price of the product, for any loss or damage, whether 
direct, indirect, incidental, consequential, or otherwise 
arising out of any failure of the product. Seller's 
warranty, as hereinabove set forth, shall not be 
enlarged, diminished or affected by and no obligation 
or liability shall arise or grow out of Seller's rendering 
of technical advice or service in connection with 
Buyer's order of the goods furnished hereunder. 

ALARM LOCK RECOMMENDS THAT THE ENTIRE 

SYSTEM BE COMPLETELY TESTED WEEKLY. 

Warning: Despite frequent testing, and due to, but 

not limited to, any or all of the following; criminal 
tampering, electrical or communications disruption, it is 
possible for the system to fail to perform as expected. 
ALARM LOCK does not represent that the product/
system may not be compromised or circumvented; or 
that the product or system will prevent any personal 
injury or property loss by burglary, robbery, fire or 
otherwise; nor that the product or system will in all 
cases provide adequate warning or protection. A 
properly installed and maintained alarm may only 
reduce risk of burglary, robbery, fire or otherwise but it 
is not insurance or a guarantee that these events will 
not occur. CONSEQUENTLY, SELLER SHALL HAVE 
NO LIABILITY FOR ANY PERSONAL INJURY, 
PROPERTY DAMAGE, OR OTHER LOSS BASED 
ON A CLAIM THE PRODUCT FAILED TO GIVE 
WARNING. Therefore, the installer should in turn 
advise the consumer to take any and all precautions 
for his or her safety including, but not limited to, fleeing 
the premises and calling police or fire department, in 
order to mitigate the possibilities of harm and/or 
damage. 

ALARM LOCK is not an insurer of either the property 

or safety of the user's family or employees, and limits 
its liability for any loss or damage including incidental 
or consequential damages to ALARM LOCK's original 
selling price of the product regardless of the cause of 
such loss or damage. 

Some states do not allow limitations on how long an 

implied warranty lasts or do not allow the exclusion or 
limitation of incidental or consequential damages, or 
differentiate in their treatment of limitations of liability 
for ordinary or gross negligence, so the above 
limitations or exclusions may not apply to you. This 
Warranty gives you specific legal rights and you may 
also have other rights which vary from state to state. 

ALARM LOCK LIMITED WARRANTY 

Summary of Contents for Trilogy DL1200









Reviews: