10
User Programming
Add a Basic User Code
Program a User Code of 987. Use Function 2, and add the new user as User 12. Refer to Function 2 (page 15).
; 2 ; 1 2
; 9 8 7 :
Add another Basic User Code
Program a User Code of 246. Use Function 2, and add the new user as User 13. Refer to Function 2 (page 15).
; 2 ; 1 3
; 2 4 6 :
Programming the PDL3000 for ProxCard Access
Program the PDL3000 for ProxCard Access as User 14.
; 2 ; 1 4
:
[Beep Beep Beep ... Beep]
High Security Access (Pr User Code Access)
Program the PDL3000 for High Security Access for User 15. A ProxCard and User Code are required for access.
; 2 ; 1 5
:
[Beep Beep Beep ... Beep]
Program a User Code of 7452. Use Function 2, and add the new user as User 15. Refer to Function 2 (page 15).
; 2 ; 1 5
; 7 4 5 2 :
In order for User 15 to open the Lock, a User Code must be entered and a ProxCard must be presented to the PDL3000 Lock. User may enter
code or present card in either order to open the lock. The sounder will beep for up to 10 seconds, waiting for the User to enter code/present card.
User Code Conflicts
Care should be taken not to program a new user code which matches the first digits of any other user code (only the code with the
least number of digits would be recognized). Example: If user codes 123 and 123456 are both entered in the system only code 123
would be recognized, unless the ENTER Key has been enabled (Function 69).To program user codes that match the first digits of
other codes, see program Function 69. An error will sound if you try to program a new user code which matches the first digits of the
Master User Code.
User Number (12)
Code for User 12
User Number (13)
Code for User 13
The sounder will beep rapidly for 10
seconds. Present a CARD to the lock
while the sounder is still beeping. The
CARD is now programmed for access
by user 14
.
The sounder will beep rapidly for 10
seconds. Present a CARD to the lock
while the sounder is still beeping. The
CARD is now programmed for access by
user 15
.
Note: For High Security Access, the user can present the card first or
enter the CODE first. In either case the sounder will beep slowly for up to
10 seconds waiting for the user to complete the sequence.
Present CARD for User 14 within the 10-second period, the beeping
will stop after the Prox Card has been programmed.
Present CARD for User 15 within the 10-second period, the
beeping will stop after the Prox Card has been programmed.
H I
H I
H I
H I
