background image

36 

number of invalid User Code entries (1-9). 

LOG

 = See... AUDIT TRAIL. 

MANAGER

 = See... CODE, MANAGER CODE. 

MASTER

 = See... CODE, MASTER CODE. 

PASSAGE

 = Allow anyone to pass through the door without 

USER CODES (door is unlocked). 

PROGRAM MODE

 = A mode allowing program / data to be 

entered through the keypad.  Only specific Users can 
program a lock manually, by entering their USER CODE, 
followed by the 

;

 key.  To exit program mode, hold any 

key until repeated beeps are heard. 

PROGRAMMABLE RELAY FUNCTIONS

 = The relay can be 

programmed for one or more functions. 

RELAY

 = Switched output allowing remote control of other 

devices.  For an explanation of all relay features, see Func-
tion 67 on page 23.   

REMOTE INPUT

 = Entry into a restricted area, by pressing a 

button connected to the REMOTE INPUT WIRES (white and 
white) by someone on the other side of the door. 

SCHEDULE

 = A programmed operation (enable/disable, lock/

unlock, etc.) on a specific day (Sunday through Saturday) and 
time. 

SCHEDULES, QUICK

 = Any one of four most common types of 

schedules can be programmed. 

TIME

 = Hours and Minutes in the HHMM format. 

TIME/DATE STAMP

 = A recorded date and time that an event 

occurred. 

TIMEOUT 

= Immediate operation for a specified number of 

hours. 

UPLOAD

 = Receive data from the lock. 

USER 

= A person who has been provided with a USER CODE 

for access through the door.

 

USER LOCKOUT, TOTAL

 = All Users (except for Master Code) 

have been locked out. 

Glossary (cont'd) 

ALARM LOCK  SYSTEMS, INC. (ALARM LOCK) warrants its 
products to be free from manufacturing defects in materials and 
workmanship for 24 months following the date of manufacture. 
ALARM LOCK will, within said period, at its option, repair or replace 
any product failing to operate correctly without charge to the original 
purchaser or user. 
This warranty shall not apply to any equipment, or any part thereof, 
which has been repaired by others, improperly installed, improperly 
used, abused, altered, damaged, subjected to acts of God, or on 
which any serial numbers have been altered, defaced or removed. 
Seller will not be responsible for any dismantling or reinstallation 
charges. 
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH 
EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. 
THERE IS NO EXPRESS OR IMPLIED WARRANTY OF 
MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A 
PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS 
IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE 
PART OF ALARM LOCK. 
Any action for breach of warranty, including but not limited to any 
implied warranty of merchantability, must be brought within the six 
months following the end of the warranty period. IN NO CASE 
SHALL ALARM LOCK BE LIABLE TO ANYONE FOR ANY 
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH 
OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, 
EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE 
SELLER'S OWN NEGLIGENCE OR FAULT. 
In case of defect, contact the security professional who installed 
and maintains your security system. In order to exercise the 
warranty, the product must be returned by the security professional, 
shipping costs prepaid and insured to ALARM LOCK. After repair or 
replacement, ALARM LOCK assumes the cost of returning 
products under warranty. ALARM LOCK shall have no obligation 
under this warranty, or otherwise, if the product has been repaired 
by others, improperly installed, improperly used, abused, altered, 
damaged, subjected to accident, nuisance, flood, fire or acts of 
God, or on which any serial numbers have been altered, defaced or 
removed. ALARM LOCK will not be responsible for any dismantling, 
reassembly or reinstallation charges. 
This warranty contains the entire warranty. It is the sole warranty 
and any prior agreements or representations, whether oral or 
written, are either merged herein or are expressly canceled. 
ALARM LOCK neither assumes, nor authorizes any other person 

purporting to act on its behalf to modify, to change, or to assume for 
it, any other warranty or liability concerning its products. 
In no event shall ALARM LOCK be liable for an amount in excess of 
ALARM LOCK's original selling price of the product, for any loss or 
damage, whether direct, indirect, incidental, consequential, or 
otherwise arising out of any failure of the product. Seller's warranty, 
as hereinabove set forth, shall not be enlarged, diminished or 
affected by and no obligation or liability shall arise or grow out of 
Seller's rendering of technical advice or service in connection with 
Buyer's order of the goods furnished hereunder. 
ALARM LOCK RECOMMENDS THAT THE ENTIRE SYSTEM BE 
COMPLETELY TESTED WEEKLY. 
Warning: Despite frequent testing, and due to, but not limited to, 
any or all of the following; criminal tampering, electrical or 
communications disruption, it is possible for the system to fail to 
perform as expected. ALARM LOCK does not represent that the 
product/system may not be compromised or circumvented; or that 
the product or system will prevent any personal injury or property 
loss by burglary, robbery, fire or otherwise; nor that the product or 
system will in all cases provide adequate warning or protection. A 
properly installed and maintained alarm may only reduce risk of 
burglary, robbery, fire or otherwise but it is not insurance or a 
guarantee that these events will not occur. CONSEQUENTLY, 
SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL 
INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A 
CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, 
the installer should in turn advise the consumer to take any and all 
precautions for his or her safety including, but not limited to, fleeing 
the premises and allege police or fire department, in order to 
mitigate the possibilities of harm and/or damage. 
ALARM LOCK is not an insurer of either the property or safety of 
the user's family or employees, and limits its liability for any loss or 
damage including incidental or consequential damages to ALARM 
LOCK's original selling price of the product regardless of the cause 
of such loss or damage. 
Some states do not allow limitations on how long an implied 
warranty lasts or do not allow the exclusion or limitation of incidental 
or consequential damages, or differentiate in their treatment of 
limitations of liability for ordinary or gross negligence, so the above 
limitations or exclusions may not apply to you. This Warranty gives 
you specific legal rights and you may also have other rights which 
vary from state to state. 

ALARM LOCK LIMITED WARRANTY

 

Summary of Contents for DL6100





































Reviews: