Alarko OPTIMA, Installation And Operating Instructions Manual

Page: 25 / 48

25
In this submenu, the errors and warnings which occur in the pump are shown.
Refer to the Section 11 for fault handling.
The symbol in front of the fault shows the description of the fault:
• “ ! “ exclamation point indicates that the pump is still in error state. In this
state pump does not run.
• “A” letter indicates that a fault was occurred and the pump resumed
automatically after 5 minutes standby.
An example for an error is given below:
In this option, there are languages choices which are used in the pump.
The desired language is modified by “Up” and “Down” buttons. To save the
language, “MENU” button is pressed for two seconds.
The desired language is modified by “Up” and “Down” buttons. To save the
language, “MENU” button is pressed for two seconds.
8. FIRST START-UP, CONTINUOUS OPERATION AND SHUT-
DOWN
7.3 Language
Depending on the water temperature in the pipe system, any part
of the pump is subject to high temperatures. In case of a contact to
the non-plastic surfaces, there is a risk of burn and fire.