Alarko OPTIMA, Installation And Operating Instructions Manual

Page: 22 / 48

22
The control display shows the information about the pump status and allows the
user to set the desired mode to operation. The layout of the buttons and display:
1.
Two row OLED Display
2. Remote Control LED (YELLOW)
3. Fault LED (RED): It is on when there is a fault.
4. Power LED (GREEN): It is on as long as the power is on.
5. “MENU” Button: To navigate through the menu and save the settings.
6. “Back” Button
7. “Down” Button
8. “Up” Button
9. “POWER” Button: To start and stop the pump.
The main menu is shown below:
It is navigated through the submenus with “MENU” button. Submenus are:
•
Operating Mode
• Service Info
• Language
To go to the submenus, navigate through the menu with the “>” sign by “Up” and
“Down” buttons and press “MENU” button.