Alamo Interstater TS-100A, TS-115A,, Assembly Instruction Manual

Page: 47 / 72

© 2004 Alamo Group Inc.
Page 7 - 3
Interstater (NH TS-100A , 115A , 125A & 135A Asy. Manual) 06/04
Wing Mower Installation
Mount Magnet Activator to
these hole for 45 degree
shut off.
Mount Magnet Activator to
these hole for 90 degree
shut off.
RH
Bracket
Shown.
Figure 5
Figure 6
Always use overhead
hoist to position mower
deck
Wing Cut Off Switch: (continued)
4.
Install Mower Rear Mounting Brackets &
Magnetic Switches. The Mower Hinge Link has a
LH & RH (See Figure 7). These brackets will slide
over the Hinge Pin which is bolted to the mower
deck at the factory. There are two Threaded holes
in the end of the hinge pin (See Figure 7) These
two holes serve dual purpose. First they hole the
hinge bracket on and the Magnetic Activator Bracket
on. Some times you will need to loosen the Hinge
pin to align the two holes so the bracket will bolt on.
(See Figure 8 & 9). Tighten the two mounting bolts
in to the hinge pin. The Hinge bracket will still turn
free.
Figure 7
LH Wing Shown
LH Wing
Rear Hinge
Bracket
Two
Threaded
Holes in
Hinge Pin
Figure 8
Hinge Pin
Bracket
Magnetic Activator
Switch Bracket
LH Wing Shown
From Rear
Figure 9
RH Wing Shown
From Rear
Hinge Pin
Bracket
Magnetic Activator
Switch Bracket