Alamo Industrial RX60, Operator'S Manual

Page: 48 / 166

ASSEMBLY
RX60/72/84 10/12 Assembly Section 3-4
© 2012 Alamo Group Inc.
ASSEMBL
Y
TAIL WHEEL INSTALLATION - LIFT TYPE (Model RX84 Only)
1. Slide bracket (2) onto beam (1).
2. Insert bolt (28) through lugs on end of beam (1)
and lug on deck.
NOTE: Insert spacer (10)into deck lug before
inserting bolt (28). Install locknut (3).
3. Install bracket (4) to rear center of deck using
bolt (24) and retain using locknut (23).
4. Insert bolt (24) through holes in brackets (2)
and (4) which will give approximately desired
cutting height. Install locknut (23) and tighten all
bolts.
Figure Asm-R-0402.
DUAL TAIL WHEEL INSTALLATION - LIFT TYPE (Model RX84 Only)
1. Attach the tailwheel beam (1) to the lug toward
the outer edge of the deck just to the rear of the
cross reinforcement using bolt (2) and nut (3).
Note: Slide position bracket (4) onto beam
before installing.
2. Attach the brackets (5) to the deck using bolts
(29) and nuts (30). Insert bolt (29) through
holes in brackets (5) and (4) which will give
approximate desired cutting height. Install lock-
nut (30) and tighten all bolts.