Alamarin Jet AJ 160, Operation And Maintenance Manual

Page: 8 / 40

Operation and Maintenance Manual
88
Version 1.5
8
DECLARATION OF INCORPORATION FOR PARTIALLY
COMPLETED MACHINERY
(Machinery Directive 2006/42/EC, Annex II, 1.B.)
Manufacturer: Alamarin-Jet Oy
Tuomisentie 16
FI-62300 Härmä, Finland
Compiler of the technical file: Hannu Rantala, Technical Manager
Alamarin-Jet Oy
Tuomisentie 16
FI-62300 Härmä, Finland
Description of the partially completed
machinery: Water jet propulsion device
Operation of the partially completed
machinery: The device is intended to be used as the
propulsion device of a motor boat. A
propulsion device transforms the torque
of the motor into propulsive force.
Model and type of the partially
completed machinery: ____________________________
Serial number of the partially
completed machinery: ____________________________
Alamarin-Jet Oy guarantees that the abovementioned partially completed
machinery meets the requirements of the Machinery Directive (2006/42/EC) and
the validating national regulations.
In addition, the company guarantees that
- the specific technical documents related to the partially completed machinery
have been created according to section B of Annex VII in the Machinery
Directive (2006/42/EC), and
- the following harmonised standards are applied: SFS-EN-ISO 12100-1 and
SFS-EN-ISO 14121-1.
Alamarin-Jet Oy also undertakes to deliver the documents related to the
partially completed machinery to the relevant national authority in electronic
format if so requested.
The partially completed machinery must not be introduced to use before the
final equipment to which it is intended to be attached has been declared to
conform to the requirements of this Directive.
Place: Kauhava, Finland
__________________________
Date and Signature