Alamarin Jet AJ 160, Operation And Maintenance Manual

Page: 31 / 40

31 Operation and Maintenance Manual
Version 1.5 Version 1.5
1. Remove the joint between the reversing deflector and the hydraulic cylinder by
opening the bolt marked by the arrow (A) (AJ 230). In models that do not have a
hydraulic reversing deflector control, the loop joint (B) which connects the reversing
deflector and the steering shaft, is removed.
4. If there is no apparent fault, the boat must be lifted out of the water for closer
inspection.
5. Remove the impeller. See section Removing the Impeller below.
6. Check the impeller more closely. You can always ask the importer or manufacturer
for instructions.
4.3.1. Removing the Impeller
Figure 4.3.1-1
A
B
2. Remove the joint between
the steering nozzle and the
steering shaft (figure 4.3.1-2).
Figure 4.3.1-2