AL Tech Mediagate MG-450HD, Manual

Page: 52 / 100

51
6.2 Audio Setup
This is guide for setting audio output of MG-450HD. You can use Stereo or Digital 5.1 ch.
9 Analogue/DCPM: Select when you connect the supplied audio cables (Red / White) to TV or Audio set directly.
9
Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby by connecting receiver (or amplifier) with Optical or Coaxial cable.
< Setup Procedure >
6.3 Network Setup
It is possible to obtain IP address automatically from DHCP Server or IP Router, or set the specific IP address. Check your network
environments.
9 Note
DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router.
DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server or IP Router, you have
to use this option. Just write IP address and Subnet mask.
①
Turn on MG-450HD and press [SETUP] on Mode Selection
screen.
Move to
②
[Audio Out] icon and press [OK]. Setup box will be
displayed under icon menu.
③
Select [Audio Out] Mode out of Stereo or Encoded Digital.,
and then press [OK].
Finally, press [SETUP] again for saving configurations.
④