AL-KO solo ak127370, Manual

Page: 19 / 20

GB
48 493516_a
Help in case of malfunction
Display Fault Fault description Fault rectification
Err 07 Mower mecha-
nism contact
switch ECU detects incorrect sta-
tus of the mower mecha-
nism output. 1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
Err 08 Start relay ECU detects incorrect sta-
tus of the start relay output. 1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
Err 09 Solenoid valve ECU detects incorrect sta-
tus of the engine solenoid
valve output. 1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
Err 10 Ignition coil ECU detects incorrect sta-
tus of the ignition coil out-
put. 1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
Err 11 Internal supply
voltage ECU detects incorrect sta-
tus of the internal supply
voltage output. 1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
Err 12 Internal supply
voltage monitor-
ing ECU detects incorrect sta-
tus of the internal supply
voltage monitoring. 1. Switch the ignition off and back on
again (position 1)
■
Self-diagnosis, if necessary, auto-
matic deletion of the fault*,
■
otherwise contact Service
* : * The display goes out for about 4 seconds.
**: Delete the error by pressing the R key (03/13).