AL-KO GT 4030, Translation Of The Original Instructions For Use

Page: 47 / 460

442360_a 47
Help in case of malfunction
13 HELP IN CASE OF MALFUNCTION
CAUTION!
Risk of injury
Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care
and cleaning work.
Malfunction Cause Remedy
Additional cutting line is not
supplied. Spool is empty. Change the spool.
Engine does not run. Rechargeable battery is flat. Charge the rechargeable battery.
Rechargeable battery miss-
ing or rechargeable battery
not seated correctly. Insert the rechargeable battery cor-
rectly.
Power supply is interrupted. 1. Remove the battery.
2. Clean the plug contacts of the ap-
pliance.
The motor protection switch
has switched off the motor
due to overload. Wait until the motor protection switch
enables the motor again.
Motor keeps cutting out.
■
Appliance faults
■
ON/OFF switch is defect-
ive.
Contact an AL-KO service centre.
Motor running, but the cutting
blade does not move. Appliance faults Contact an AL-KO service centre.
Appliance vibrates unusually. Spool is contaminated. Clean the spool, renew it if necessary.
Appliance faults Contact an AL-KO service centre.
Rechargeable battery operat-
ing time is significantly
shorter. Grass is too long or too wet.
■
Cut the grass at a greater height.
■
Let the grass dry.
Cutting height is too low. Cut the grass at a greater height.
The service life of the re-
chargeable battery has ex-
pired. Replace the rechargeable battery.
Only use genuine accessories from
the manufacturer.
Rechargeable battery cannot
be charged. Rechargeable battery con-
tacts are dirty. Contact an AL-KO service centre.
Rechargeable battery or
charging unit is defective. Order spare parts. Contact an AL-KO
service centre.
Rechargeable battery is too
hot. Allow the battery to cool down.