AL-KO G3023025, Translation Of The Original Instructions For Use

Page: 21 / 196

469927_a 21
Maintenance and care
7 MAINTENANCE AND CARE
7.1 Cleaning the pump
NOTE
After conveying chlorinated swimming
pool water or fluids which leave a
residue, the pump must be flushed out
with clear water.
1. Clean the suction slots on the suction foot
with clear water if necessary.
8 STORAGE
NOTE
If there is the danger of frost, the system
must be completely drained and the
pump must be stored in a frost-proof
place.
9 DISPOSAL
Electrical and electronic appliances do not
belong in household waste, but should be
collected and disposed of separately.
The packaging, device and accessories are
made of recyclable materials, and must be dis-
posed of accordingly.
10 HELP IN CASE OF MALFUNCTION
DANGER!
Danger of electric shock.
When working on the
pump, there is the risk of
receiving an electric shock.
■
Disconnect the mains
plug before correcting
any malfunctions!
■
Faults in the electrical
system must be rectified
by a qualified electri-
cian.
Malfunction Possible
cause Remedy
Engine does
not run. Impeller
blocked Remove dirt
from the suction
area. Clean with
a suitable tool
through the
opening on the
back of the mo-
tor housing.
Thermal pro-
tection switch
has switched
off. Wait until the
thermal protec-
tion switch on
the pump
switches on
again. Take
note of the max-
imum temperat-
ure of the con-
veying medium.
Have the pump
inspected.
No mains
power. Check fuses,
have the power
supply checked
by a qualified
electrician.
Float switch
does not
switch off
when the wa-
ter level rises. Send the pump
to an AL-KO
service facility.
Pump run-
ning but
does not
feed. Air in pump
housing. Vent the pump
by holding it at
an angle.
Blockage on
the suction
side. Remove dirt
from the suction
area.
Pressure line
closed off. Open the pres-
sure lone.
Pressure
hose kinked. Extend the pres-
sure hose.