AL-KO DESIGN ED-H1 Series, Operating And Installation Instructions

Page: 16 / 32

Translation from the original operating instruction 16
AL-KO air heater / air cooler DESIGN
5. Assembly
Warning!
Installation, electrical connection, media supply connection, maintenance, commissioning, repair, etc. may only
be performed by trained staff.
„
The place of installation as well as the installation structure must provide permanent and vibration-free support of
the devices.
The place of installation and the installation structure must be checked by a structural engineer, if required.
„
AL-KO air heaters / air coolers are delivered in pre-assembled form.
„
The manufacturer documentation must be considered before installation or removal.
„
The air heaters / air coolers must be levelled during installation!
5.1 Ceiling installation of the devices
„
Mark the fastening points with the template provided in the packaging.
„
Drill fastening holes into the ceiling.
„
The installation distance between the device and the ceiling must be at least 80 mm. The factory mounts standard
brackets that ensure the minimum distance.
„
It must be ensured that there is sufficient space for the media connections!
„
Individually adjustable brackets (optional order) can be used to create larger distances or for adjustment.
„
Attach the air heater / air cooler to the ceiling.
„
Attach the media connections.
„
Fasten the hood with the fastening straps to the supporting part and then close and fasten it with the quick-release
clips.
1 Quick-release clip
2 Slot for fastening straps
Cooling
The maximum throwing distances apply for an air outlet temperature of 10 K below room temperature and ideal condi-
tions for the primary air stream.
Design size Max. throwing distance
in m
ED-K1… 4.0
ED-K2… 10.0
ED-K3… 9.1