AL-KO BC 4125 II-S, User Instructions

Page: 22 / 260

en
EC declaration of conformity
22 BC 4125 II-S
PROBLEM POSSIBLE CAUSE CORRECTION
Wrong lever position on the
choke
Set the lever to RUN Engine starts but does not run
with full performance
Air filter clogged Clean or exchange the filter
Motor runs spasmodically Dirty, incorrectly adjusted or
wrong spark plug
Clean, adjust or exchange the
spark plug
Excessive smoke Incorrect fuel mixture Use the correct fuel mixture
ADVICE
In the case of faults that are not listed in this table, or faults that you cannot rectify without
assistance, please contact our customer service department.
EC DECLARATION OF CONFORMITY
We hereby declare that this product in the form in which it is marketed by us complies with require-
ments of the harmonized EC directives, EC safety standards and the product-specific standards.
Product Manufacturer Authorised representative
Brush cutter
Type
BC 4125 II
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
Anton Eberle
Ichenhauser Str. 14
D-89359 Kötz
Serial number EC Directives Harmonised standards
G 230 2305 2006/42/EC
2004/108/EG
2000/14/EG (13)
2002/88/EG
ISO 11806:2009-01
ISO 14982:1998-09
Kötz, 6 June, 2012
Antonio De Filippo
Managing Director
Sound power level
measured: 116 dB(A)
guaranteed: 119 dB(A)
Conformity assessment
2000 /14/EC Appendix V