background image

Subject to changes in line with technical progress.

17

3420878

Product description

The compact air handling unit can also be operated with the control unit removed in a time program or via a presence 

detector. 

In both cases, malfunctions are signalled by the red LED status display installed on the air handling unit. However, to be 

able to determine the corresponding causes of malfunctions, the control unit must be connected to a display.

3.1.7  Remote access portal

The compact air handling unit can also be optionally monitored and set remotely via the AL-KO THERM GmbH remote 

access portal 

https://remote.al-ko.com/

 for example, a PC, a notebook or a tablet.

In addition to the digital twin of the mobile control unit, the AL-KO THERM GmbH remote access portal offers functions 

such as historical recording of alarms and data points, a plant diagram and automatic notification by e-mail for alarms.

3.1.8  HMI for web

With the 

HMI for web

 the entire installation can be fully set and commissioned according to the logged-in password 

level. 

HMI for web

 is the standard equipment of the control. The function can be accessed via the network connection 

of the control via an on-site terminal (PC, notebook, table) via web browser. Menu structure and password level are 

identical to the control unit.

3.1.9  Network connection

Both the AL-KO THERM GmbH remote access portal and 

HMI for web

 are connected to the compact air handling unit via 

a network connection. This is located above the main switch.

3.1.10  Connection for building management system

The control system of the compact air handling unit can be integrated into the building management system (BMS) via 

Modbus or BACnet using an optional bus module.

Summary of Contents for AIRCABINET

























































Reviews: