AL-KO 113 365, Original Instructions For Use

Page: 30 / 192

GB
30 CS 36 Li
Product overview (01)
Symbol Meaning
Wear sturdy shoes!
Read the operating instructions be-
fore starting operation.
Always operate the chain saw with
both hands!
2.3 Safety and protective devices
WARNING!
Danger of serious injury from manipu-
lated safety and protective devices
As a result of manipulated safety and
protective devices, serious injury can oc-
cur when working with the chain saw.
■
Never deactivate safety and protect-
ive devices.
■
Only work with the chain saw if all
safety and protective devices func-
tion correctly.
2.4 Overload protection
The chain saw is equipped with an overload pro-
tection which switches off in case of overload.
After a cooling-down phase, the chain saw can
be switched on again.
2.5 Switch-on protection
If the operator applies the throttle quickly several
times in succession, the chain saw switches off
for a few seconds to protect the electronics and
the saw chain. In this case, wait until the chain
saw can be switched on again.
2.6 Chain brake
The chain saw has a manual chain brake that is
triggered by the hand guard, for example if kick-
back occurs. When the chain brake is triggered,
the saw chain is abruptly stopped and the engine
switched off.
2.7 Designated use
The chain saw is exclusively designed for do-
mestic, DIY and gardening applications. In this
sector, the chain saw can be used for light wood
sawing work, e.g. for:
■
Cutting up timber
■
Pruning hedgerows
■
Sawing firewood
Because of the electrical drive, the rechargeable
battery-chain saw can be used not only on open
ground but also in closed rooms for sawing wood.
Any application not in accordance with the applic-
ation described here shall be regarded as mis-
use.
The chain saw must not be used in the commer-
cial sector.
CAUTION!
Danger of injury due to non-desig-
nated use!
If wood or other substances embedded
with foreign bodies are sawn with the
chain saw, injury can result.
■
Only use the chain saw for light wood
sawing work.
■
Before sawing wood, check for for-
eign bodies, e.g. nails, screws, fit-
tings.
3 PRODUCT OVERVIEW (01)
No. Component
01/1 Saw chain
01/2 Chain bar
01/3 Quick-tension chain wheel with central
lock and rotating ring
01/4 Hand guard
01/5 Handle
01/6 Battery
01/7 Throttle lever
01/8 Locking button
01/9 Rear handle
01/10 Cover for chain sprocket
01/11 Bumper spike
01/12 Cap of the chain oil tank
01/13 Viewing aperture of the chain oil tank