Service Menu
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de
12
7 Service Menu
In this menu the most important parameters can be set and the basic functions of the
device can be used.
Use the short touch to navigate between the individual menu items.
Use the long touch to select a menu item.
Fig. 7.1 Service Menu
Service Menu items:
–
RESCAN USB DRIVE
Enables USB mass storage device
–
FIRMWARE UPDATE
Firmware update from a USB mass storage device
–
CALIBRATE TOUCH-SCREEN
Touchscreen calibration (see 7.1)
–
SPK SETUP
Access to configuration menu
Network parameters, COM interfaces, date, time, password and other important
parameters of the device can be set (see 7.2).
–
UPDATE PROJECT
CODESYS project update (see 7.4).
–
EXIT
Exit menu
7.1 Touchscreen Calibration
The resistive touch is already calibrated. However, in case of touchscreen malfunction,
recalibrate the touchscreen. To recalibrate the touchscreen:
– select
CALIBRATE TOUCH-SCREEN
– touch the crosses that appears consecutively exactly at its center
– When the calibration is complete, the user program will be executed.
7.2 Configuration
– Select
SPK SETUP
.