4
akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: +49 (0) 511 16 59 672–0 - www.akytec.de
Safety
Read this manual carefully before installing, operating or servicing the device.
The device has been designed and built solely for the intended use described in this guide, and can
only be used accordingly. The technical specifications contained in this guide must be observed.
Any other use is considered improper.
CAUTION
This device must not be used for medical devices which receive, control or otherwise affect
human life or physical health.
When installing and using this product, all applicable state, federal and local regulations must be
observed.
Based on safety considerations and compliance with the data provided in the documents, the repair
of the components of the products is carried out exclusively by the manufacturer.
There is a dangerous voltage on the terminal block. Any connections to the device and maintenance
operations must be carried out only when the power of the device is turned off.
The device's method of protection against electric shock meets the terms of class II, IEC 61131-2-
2012.
The device installation must be performed in particularized equipment cabinet, the inner access to
which is allowed only to approved specialists.
CAUTION
It is forbidden to use the device in corrosive environments with acids, alkalis, oils, etc. in the
atmosphere.
Obey all the necessary rules and instructions when using programmable logic controllers in areas
where technical safety requirements apply.
Failure to obey these warnings could result in personal injury or equipment damage.
Akytec company shall not be liable for technical or editorial errors or omissions contained in this
document.
