AK-EC-03 - user manual
p. 4
EV charger
Charging status indicator
Fault
Connected
Power
Charging
Comment
Off, no connection with the car
Shine
There is a connection with the
car but it does not charge
Car is charging
End of charging process
Car communication failure
Overload protection
Leakage protection
Overvoltage protection
Overheating protection
Charger test
Abnormal current
---
---
---
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Shine
Blink
Blink
Blink
Blink
Blink
Blink
Blink
---
---
---
---
---
---
---
---
---
---
How to use
1. Check that the charger or cable is not damaged.
2. Make sure the charger has the right type of plug for your car.
4. Check that the power socket is not damaged.
5. Connect the charger to the electrical outlet (Schuko).
7. Connect the other plug to the car's charging port.
3. Turn off the car motor.
6. Pull the protective cap off the plug.
8. The charging process will start automatically. The blue diode will start blinking.
9. When the charging process is finished, the charger will automatically turn off. The blue
diode will start shining.
10. After charging, disconnect the charger from the electrical outlet, then disconnect the plug
from the car's charging port and put the protective cap on.
