© 2016 AKW
5
15-010-048-01
Deflector Screen Instructions
Technical Help line
01905 560219
Do not silicone
between the wall
profile and the wall
as further adjustment may
be required.
Only seal the entire
enclosure after installation.
See page 15
TIP
Wall profile installation
TIP
X4
X4
WARNING -
Ensure there are no buried pipes
or cables before drilling.
Ensure the wall surface is
finished, level and capable
of supporting the screen.
Drill the wall through the
centre of the slots with a
6mm tile or wall masonry
drill bit and insert wall
plugs.
Ensure profile
is vertical by
using the
profile slots
for finer
adjustment.
4x35mm
i
Ensure the fixing holes are to
the inside of the enclosure.
i
Use masking
tape to drill on
tiled surfaces.
