© 2016 AKW
2
15-010-048-01
Deflector Screen Instructions
Technical Help line
01905 560219
Do not discard this document as it contains important warranty information.
Read all the instructions carefully and leave the instructions with the end user.
The product is heavy up to (50kg Max). Get someone to help to lift, assemble and install it.
Before you start work:
Check for hidden cables or pipes before drilling into a wall.
Caution:
Always start with the wall profile and align the enclosure into position checking the
area is suitable before marking out and fixing.
Always wear safety glasses when you use power tools and use the appropriate personal
protection equipment.
If you have to drill holes into ceramic tiles, stick a piece of masking tape to the tile to stop the
drill bit from slipping and damaging the tile. Do not use your drill on hammer action if you are
drilling holes into ceramic tiles.
Always disconnect power tools from the electrical supply when you have finished working with
them.
Make sure any electrical cables do not cause a trip hazard.
Take care when you handle the profiles. They may have sharp edges.
Follow the manufacturer’s safety instructions when you use any silicone sealant or degreasing
agent.
Important safety notes
When you unpack the product:
Take care when you unpack the product and make sure that you do not inadvertently discard
any small parts. If any parts are missing or damaged contact the AKW customer services.
Before you start work:
Check the shower tray or wet-floor is level and is completely sealed to finished or tiled walls.
Check that finished walls are sound and free from cracks or loose tiles or grout.
While you work:
Make sure that all surfaces are clean, dry and free from loose debris or dust.
Protect the surfaces of the shower tray and cover the waste to prevent the loss of small
components and prevent debris from entering the waste trap.
Make sure that you follow the manufacturer’s instructions to degrease any surfaces that you
need to silicon.
Use the external packaging to protect the floor and wall when you assemble the product.
To check the accuracy of your spirit level place it on a horizontal surface and note the bubble
position between the markers. Rotate the spirit level through 180° and note the bubble position
again. Ensure the markers are level. Repeat the test vertically.
After installation:
Do not wet the enclosure for 24 hours to ensure that the silicone sealant is fully cured.
