Akuvox X933H, Manual

Page: 111 / 130

X933H Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com 101
Parameter Set-up

Language Type: select the language according to your need.

Recognition Sensitivity: adjust the voice assistance recognition
sensitivity among " Low ", " Norma l" and " High " according to your need.

Talk Mode: move the toggle switch to the right if you want to enable the
talk mode. When the Talk mode is enabled, voice assistant will stay on to
receive your voice commands during a time span of 30 seconds without
your needing to call " Albert" again to wake up the voice assistant., while
if you disable it, the voice assistant will be wake up again for each voice
command.

Not Disturb At Night : move the toggle switch to the left to enable the
function. This function is applied when you want the voice assistant to
stay silent while carrying out what it is made to do according to your
voice commands.

Supported Command : enable or disable the 22 voice commands
according to your need.
Please see the voice command details below :
N
O
Voice
Command
Description Voice Prompt
1 Intruder
mode off
Use it when you want to
clear the arming mode
when the arming alarm is
triggered. (You are
Please Input Password