Akuvox SP-R50P, User Manual, Page: 15 / 79

15
3.6. Call Waiting
To configure Call Waiting via Phone interface:
1. Press Menu -->Features-->Call Waiting-->Enter, ;
2. Use the Left or Right key to activate or deactivate call waiting.
3. Then press the Save key to save the changes.
3.7. Call Completion
To monitor the status of the other phone and send a prompt when the status
changing. For instant, if user makes a call and the callee is unavailable to answer the
call, the feature will notify the user when the callee is available to receive the call.
This function can only be triggered when receiving 486 Busy message. Moreover, if
the phone enabled the voice message ,the function would also be unavailable.
To configure Call completion via Phone interface.
1.Press Menu -->Feature -->Call Completion->Enter
2.Use the Left or Right key to enable or disable call completion.
3.Then press the Save key to save the changes.
Note: Not all servers can support call completion.
3.8. Call Forward
You can set the static forward to transfer all the incoming calls to a specified number;
Also you can use dynamic forward to transfer all the incoming calls to the target
number inputted by the user when the phone is ringing.
Forward: Enable call forward feature, Options as follows
：

Always forward: All the incoming calls will be transferred unconditionally to a
specified number.

Busy Forward: The incoming calls will be transferred to specified number when