R28 Door Phone Administrator Guide
64
•
HTTP URL:
enter the URL if you select the HTTP to carry out the action.
•
Action Delay:
set up the delay time when the action is carried out. For example, if you
set the action delay time at 5 seconds, then the corresponding actions will be carried
out 5 seconds after your press the button.
•
Execute Relay:
set up relays to be triggered by the input.
•
Door Status:
display the status of the input signal.
14.11 Configure PIN Code for Door Unlock
You can create and modify both public PIN codes and private PIN codes for the door
access on the R28 door phone.
14.11.1 Configure Public Code for Door Unlock
A public PIN code is configured and used by the property in the same building or in the
same community. To do this configuration on the web
Intercom > PIN Setting > Public
PIN
interface.
Parameter Set-up:
•
Enabled:
disable the public key feature, the door can not be opened by the public key.
Enable it, you can use the public key to open the door.
•
PIN Code:
customize 3-8 digit numbers for the public keyvalue.
Summary of Contents for R28 Series
Page 1: ......
