background image

IMPORTANT

If the mains plug requires replacement, please follow the following instructions. 

DO NOT CONNECT THE CENTRE PIN (EARTH). 
Connect the Blue wire to the (N) terminal ( this may be 
coloured blue). 
Connect the Brown wire to the (L) terminal adjacent to 
the fuse ( this may be coloured brown). 
This appliance must have a 3A fuse fitted.

E-9

ON HANDLING DISCS

ON CLEANING DISCS

Do not touch the playback side of the disc.

Do not attach paper or tape to disc.

Fingerprints and dust on the disc cause sound 
distortion and skipping of tracks. Wipe the disc 
from the centre outwards with a soft cloth.

If you can not wipe off the dust with a soft cloth, 
wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.

Do not use any type of solvent such as thinner, 
benzine, commercially available cleaners or anti-
static spray for vinyl Lps. It may damage the disc.

SPECIFICATIONS

Power Supply : 230V – 50Hz
Power Consumption : 13W
Output Power (RMS) : 2 X 2W
Terminal impedence : Speaker X 4ohms
Unit Dimension [main] : 195(L) x 135(W) x 188(H)mm
Unit Dimension [speaker] : 150(L) x 120(W) x 183(H)mm
Net Weight : 2.5kgs
Gross Weight : 3.1kgs
Tuning Frequency:   

AM: 540-1600KHz

 

 

 

FM: 88-108MHz

DC Operation : 9V ( 6 x UM-2)

Disc operation : CD and MP3. 7cm 12cm 
discs

Summary of Contents for APTMIC606DR











Reviews: