background image

IMPORTANT

If the mains plug requires replacement, please follow the following instructions. 

DO NOT CONNECT THE CENTRE PIN (EARTH). 
Connect the Blue wire to the (N) terminal ( this may be 
coloured blue). 
Connect the Brown wire to the (L) terminal adjacent to 
the fuse ( this may be coloured brown). 
This appliance must have a 3A fuse fitted.

Page 9

ON HANDLING DISCS

ON CLEANING DISCS

Do not touch the playback side of the disc.

Do not attach paper or tape to disc.

Fingerprints and dust on the disc casue picture
and sound deterioration. Wipe the disc from the
centre outwards with a soft cloth. Always keep
the disc clean.

If you can not wipe off the dust with a soft cloth, 
wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.

Do not use any type of solvent such as thinner, 
benzine, commercially available cleaners or anti-
static spray for vinyl Lps. It may damage the disc.

Specifications

Power Supply : 230V ~ 50Hz
Power Consumption : 9 Watt
Output Power(RMS) : 2 x 1W
Terminal impedence : Speaker 4ohms
Unit Dimensions : 236(L) x 215(W) x 115.5(H)mm
Net Weight : 1.4kg
Gross Weight : 1.8kg
Tuning Frequency : AM: 540-1600 KHz
 

                FM: 88-108 MHz

DC Operation : 12V (6 X UM-2)

Summary of Contents for APCD-913











Reviews: