If you are still having difficulty please call the Technical help line. Ring 01422 203676 (Normal
rates apply).
Opening hours Mon-Fir 8 am - 8 pm. Sat 9 am - 4 pm. Sun 11am - 4 pm. “Bank holidays as
Sun”
Fault Guide.
Symptom
Fault
Action
No power to player.
Check the power plug is in
firmly and connected to a
power supply.
If batteries are fitted, ensure
they are new and fitted the
correct way round.
Dead. No Operations
Function switch in incorrect
position.
Switch to CD or Radio
No Radio operations but Led
lit
Function switch set to CD
Switch to Radio. Turn up the
volume.
No Radio stations on MW
Poor signal area
Rotate the case of the radio as
the internal aerial is
directional. The extending rod
aerial is not in use on AM
No Radio stations on FM
Poor signal area
Extend and rotate the rod
aerial.
Dirty or damaged disc
Carefully clean the disc and
place in the player label side
up.
Not playing CD’s
Dirty laser lens
Carefully clean the lens with a
“cotton bud”.
CD PROGRAMMING
UP TO 20 TRACKS CAN BE PROGRAMMED FOR PLAY IN ANY ORDER.
TO PROGRAM
1) SET IN CD MODE.
2) PRESS THE PROGRAM BUTTON, THE DISPLAY WILL SHOW 01 AND FLASH, AND THEN IT
CHANGES TO 00.
3) SELECT A DESIRED TRACK BY USING THE SKIP BUTTONS.
4) PRESS THE PROGRAM BUTTON TO ENTER THE TRACK INTO MEMORY.
5) THE LED DISPLAY CHANGES TO 02, AND THEN CHANGES TO 00 AGAIN.
6) REPEAT 3~5, UP TO 20 TRACKS. AFTER STORING 20 TRACKS, THE DISPL AY SHOWS 01 AND
FLASHES AGAIN.
TO COMPLETE PROGRAMMING AND START PLAY
PRESS PLAY BUTTON, THE PROGRAM WILL PLAY AUTOMATICALLY.
Page 8
TO CLEAR PROGRAMMING
1) PRESS PROGRAM BUTTON ONCE, THE DISPLAY WILL SHOW 01, AND THEN IT CHANGES TO
00 IN A FEW SECONDS.
2) PRESS AND HOLD THE STOP BUTTON AGAIN TO CLEAR PROGRAM.
Should you experience any problems please see guide below before calling the help line
