7. Menu Operation.
Connect the TV/DVD to the Mains supply and suitable aerial. It is advisable not to connect other apparatus
until you have established that the TV is working correctly. If using the TV for DVBt (Freeview) viewing, the
existing aerial may not be suitable. Indoor aerials (set top) may not be suitable for some of the received
stations. If stations are missing, freeze or break up, it is certainly the aerial signal that is not sufficient.
Turn on the power at the rear of the TV and a Red led will be displayed in the lower right corner.
Press either the Standby button on the remote control or the Power button on the TV.
The led will now turn Green and the screen will light up after approx 5 seconds.
At this stage no stations will be stored.
First Time Installation. (Fig 1).
As this is the first time the TV has been connected to the power, the
menu (Fig 1) will be displayed.
Press the LCD MENU button on the Remote Control. The menu as in Fig
1 will be shown.
Using the
▲
/
▼
buttons select “COUNTRY” and then use the
►
/
◄
buttons to select the correct country. “Default is UK”.
Using the
▲
/
▼
buttons select “LANGUAGE” and then use the
►
/
◄
buttons to select the language of your choice. “Default is English”.
Using the
▲
/
▼
buttons select “ANALOG PROGRAM SEARCH” and
then use the
►
/
◄
buttons to select. “
A
√
will be displayed in the box
”.
Using the
▲
/
▼
buttons select “DIGITAL PROGRAM SEARCH” and then
use the
►
/
◄
buttons to select . “
A
√
will be displayed in the box
”.
Using the
▲
/
▼
buttons select “OK” and press “ENTER”. The TV will now
start to search for all the TV stations in your area. If you select
“CANCEL” the message (Fig 2) will be displayed. Use the
►
/
◄
buttons
to select your preferred box and press “ENTER”.
The displays “Fig 3 and Fig 4” will be shown as the tuning progresses.
When the tuning is completed, the TV will display the First Channel in
the Digital mode (BBC1).
Fig 2
10
Fig 1
Fig 3
Fig 4
