Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Functional description / control panel
On/Off button:
As soon as the blue operating light lights up in the display, you can switch on the unit with
the On/Off button. After switching on, the individual setting symbols light up.
Steam strength/operating strength:
With this button you can set your individual humidification strength.
The following options are available:
One green bar:
>
Very weak humidification performance
Two green bars:
>
Weak humidification performance
Three green bars:
>
Average humidification output
Four green bars:
>
High humidification performance
Five green bars:
>
Maximum humidification output
Target humidification key:
Use this key to set your individual humidification target. The following options
are available:
L
>
Lowest target humidity value (below 25%) > Not recommended
25% / 30% / 35% / 40% / 45% / 50% / 55% / 60% / 65% / 70% / 75% / 80% / 85%
H
>
Highest target humidity value (over 85%) > not recommended
The unit humidifies until the set humidity is reached and then switches off automatically. If the humidity falls
below the set target value again, the unit switches on again automatically.
Note: The humidifier's humidity sensor sits under the unit (so as to be as far away as possible from the
unit's steam outlet). Nevertheless, the humidity sensor always gives only a tendency of the room humidity.
This is because, depending on the background, the displayed value may be lower or higher than the actual
room humidity. However, by varying the target humidity value, this circumstance can be compensated for !
On/Off button
Target humidity
button
Steam strength
(operating
strength)
Rotation button
for steam nozzle
Timer
(Remaining
term)
Interval
button
Main switch
operating light
Display of the
current air humidity