III. CONNECTION
II. SPECIFICATIONS
1. After removing the packaging materials, there
should be 2 items:
a. Intelligent Dehumidifier
b. AC/DC switching mode power supply
2. Plug the DC power jack (11) of the switching mode power supply to
the DC Power socket(8), then connect the AC plug(12) of the
switching mode power supply to the appropriate main socket.
Press the “On/Off” button (1) to “On” position, The Intelligent
Dehumidifier will begin to operate. The green LED will be
turned on. Listen and feel for the air blowing from dry air
outlet. [as Fig.1]
TO switch off the unit, press “On/Off” button (1) to Off”
position, the Intelligent Dehumidifier will be turned off. [as Fig.2]
3
6Amp
72W
223mm(W)×351mm(H)×181mm(D)
750
IV. REMOVABLE WATER TANK
When the water tank is full, with approximately 1.5 litre of
water collected, the unit will be switched off automatically
and the “Yellow” LED(3) will be on.[as Fig.3]
To remove the water tank, first switch off the Intelligent
Dehumidifier, press “On/Off” button to the “Off” position.
Then, remove the water tank from the unit and pour the
water out to the toilet or bathroom. Put the water tank
back into the unit. To continue dehumidifying, press the
“On/Off” button to “On” position again.
4
Fig.3
Fig.1
Fig.2
Summary of Contents for WDH-898MD
Page 1: ...MODEL WDH 898MD WDH ...
