background image

 

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany 

www.AKTOBIS.de

 

Email: [email protected] 

 
 
 
 

Important safety instructions: 

 

 

Operate the unit only in a straight position and with a straight/level stand ! 

 

Make sure that there is a minimum lateral distance of 30 cm and a minimum upper distance of 30 cm to 
inventory and walls !  

 

Do not place any objects on the appliance and make sure that the air intake and the exhaust air are always 
free! 

 

The appliance does not replace room ventilation and is not suitable for use as an extractor bonnet when 
cooking. 

 

Ventilate the room regularly. Especially if it is a very airtight room or there is a high oxygen consumption (e.g. 
fireplace, gas cooker, many people etc.). 

 

Supervise the air purifier when children or animals are near the unit ! 

 

This air purifier should only be operated by persons who have the necessary physical and mental capabilities 
to operate this device without problems ! 

 

Watch out for electricity, never walk into or insert objects into the appliance ! 

 

Only qualified personnel or electricians are permitted to open the unit or carry out repairs to the unit and/or the 
mains cable (mains plug) ! 

 

Protect the unit from all moisture and wetness ! 

 

Only use the recommended voltage for operating the unit ! 

 

Make sure that the power cable is unfolded (untied) before connecting it to the socket ! 

 

Make sure that the plug is cleanly and properly connected to the socket before using the appliance ! 

 

Do not expose the filters to insect spray, they could later release the insect spray unintentionally ! 

 

Avoid ashes (cigarette ash) being sucked in by the appliance, this can lead to fire in the worst case ! 

 

Switch off the unit before unplugging it from the mains ! 

 

Switch off the appliance and unplug the mains plug if you want to clean the appliance ! 

 

Only clean the appliance with mild cleaning agents ! 

 

Avoid using the unit at high room temperatures or in humid conditions ! 

 

Do not make any independent modifications to the unit or the cables ! 

 

Never reach near the plug or socket with wet hands ! 

 

Make sure that highly flammable substances (e.g. gases/oils etc.) are never in the vicinity of the unit ! 

 

If you are not going to use the unit for a long time, switch it off and disconnect the mains plug ! 

 

Never look directly into the switched-on UV light, it can cause injuries to the eye ! 

 

Please switch off the unit immediately and disconnect it from the mains/power supply if anything seems 
to be wrong !!! In this case, please contact a specialist and do not attempt to repair the unit yourself !!! 

 
Examples: 

Fuse has blown or the appliance is making unusual noises and/or it smells burnt. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 4260196719407













Reviews: