Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Troubleshooting:
The unit ices up
At cold temperatures or during long periods of continuous operation, the unit may freeze up despite the defrost
sensor. In this case, we recommend that you manually defrost the unit by switching it off and then only operate it
with a target humidity value of 60% r.l. for the time being, or warm up the room a little. The target humidity value
can then be gradually lowered each day (e.g. 50%, then 40%, etc.).
The unit does not dehumidify enough
Please remember that the primary aim is not to gain as much condensation water as possible, but to dry and/or
keep dry the room air or ceilings, walls and inventory !
Furthermore, bear in mind that the building dryer can only remove moisture from the air and only indirectly from
materials (screed/plaster). Depending on the condition of the ceilings, walls and fixtures, it can take several weeks
before they release the stored moisture back into the air! For this reason, we also recommend that if you use your
own humidity meter (hygrometer), you place it as freely as possible and somewhat away from walls and ceilings,
because otherwise the determined humidity value of the room air will be falsified!!!
As with all building dryers, the dehumidification performance is decisively influenced by the following factors:
A) Humidity content of the room air and B) Heat/temperature in the room.
For safety's sake, here is an approximate dehumidification table for DURABLE OPERATION:
30 degrees
and 80% r.h. = approx. 120 litres
and at 60% r.h. = approx. 60 litres
20 degrees
and 80% r.h. = approx. 60 litres
and at 60% r.h. = approx. 35 litres
15 degrees
and 80% r.h. = approx. 45 litres
and at 60% r.h. = approx. 25 litres
10 degrees
and 80% r.h. = approx. 25 litres
and at 60% r.h. = approx. 17 litres
All figures are approximate per day (fluctuation tolerance) when measured directly at the unit inlet and of course
these values only apply if the temperature and moisture content remain constant!
Other:
Warranty statement:
Notwithstanding the statutory warranty claims, the manufacturer grants a warranty in accordance with the laws of
your country, but at least 1 year (in Germany 2 years for private individuals). The warranty begins on the date of
sale of the appliance to the end user.
The warranty only covers defects that are due to material or manufacturing faults.
are.
Warranty repairs may only be carried out by an authorised customer service. To
To make your warranty claim, please enclose the original sales receipt (with date of sale).
Excluded from the guarantee are:
-
Normal wear
-
Improper applications, such as overloading the appliance or non-approved accessories.
-
Damage due to external influences, use of force or foreign objects
-
Damage caused by non-observance of the operating instructions, e.g. connection to an incorrect mains voltage
or non-observance of the assembly instructions.
-
Completely or partially dismantled units
